s
By: RF Competition   Copy   Share  (183) 

धातुओं की लवणों के विलयन और अम्लों के साथ अभिक्रियाएँ | Reactions of Metals with Solutions of Salts and Acids

1383

धातुओं की अम्लों के साथ रासायनिक अभिक्रियाएँ (Chemical Reactions of Metals with Acids)

जब धातुओं की अम्ल के साथ रासायनिक अभिक्रिया होती है, तो उत्पाद के रूप में लवण प्राप्त होता है। साथ ही हाइड्रोजन गैस मुक्त होती है। इस अभिक्रिया को इस प्रकार समझा जा सकता है–
धातु + तनु अम्ल → लवण + हाइड्रोजन

When metals react chemically with acids, salt is obtained as a product. Also hydrogen gas is liberated. This reaction can be understood as–
Metal + dilute acid → salt + hydrogen

रसायन विज्ञान के इन 👇 प्रकरणों को भी पढ़ें। (Also read these 👇 episodes of Chemistry.)
धातुओं की जल के साथ रासायनिक अभिक्रियाएँ | Chemical Reactions Of Metals With Water

जब धातुएँ नाइट्रिक अम्ल के साथ रासायनिक अभिक्रिया करती हैं, तो उस अभिक्रिया में हाइड्रोजन गैस मुक्त नहीं होती। इसका कारण यह है कि नाइट्रिक अम्ल एक प्रबल ऑक्सीकारक होता है। यह अभिक्रिया में उत्पन्न हाइड्रोजन गैस को ऑक्सीकृत कर जल में परिवर्तित कर देता है। साथ ही स्वयं (नाइट्रिक अम्ल) नाइट्रोजन के किसी ऑक्साइड में अपचयित हो जाता है। इसके विपरीत मैग्नीशियम और मैंगनीज धातुएँ तनु नाइट्रिक अम्ल के साथ रासायनिक अभिक्रिया करते हैं, तो हाइड्रोजन गैस मुक्त होती है। अभिक्रिया में बुलबुले बनने की दर मैग्नीशियम धातु के साथ सबसे अधिक होती है। इस परिस्थिति में रासायनिक अभिक्रिया सबसे अधिक ऊष्माक्षेपी होती है। धातुओं की अभिक्रियाशीलता को घटते क्रम में इस प्रकार लिखा जा सकता है–
Mg>Al>Zn>Fe
कॉपर धातु की अम्लों के साथ रासायनिक अभिक्रिया होने पर न तो बुलबुले बनते हैं और न ही ताप में कोई परिवर्तन होता है। अतः स्पष्ट है कि कॉपर धातु तनु हाइड्रोक्लोरिक अम्ल के साथ अभिक्रिया नहीं करती है।

When metals react chemically with nitric acid, hydrogen gas is not liberated in that reaction. This is because nitric acid is a strong oxidising agent. It oxidises the hydrogen gas produced in the reaction and converts it into water. Simultaneously, itself (nitric acid) is reduced to an oxide of nitrogen. In contrast, when magnesium and manganese metals react chemically with dilute nitric acid, hydrogen gas is liberated. The rate of bubble formation in the reaction is highest with magnesium metal. Under this condition the chemical reaction is most exothermic. The reactivity of metals can be written in decreasing order as–
Mg>Al>Zn>Fe
When copper metal reacts with acids, neither bubbles are formed nor there is any change in temperature. So it is clear that copper metal does not react with dilute hydrochloric acid.

रसायन विज्ञान के इन 👇 प्रकरणों को भी पढ़ें। (Also read these 👇 episodes of Chemistry.)
धातुओं की अम्ल, क्षारक और ऑक्सीजन के साथ अभिक्रिया | Reaction Of Metals With Acids, Bases And Oxygen

एक्वा रेजिया (Aqua Regia)

यह 3:1 के अनुपात में सांद्र हाइड्रोक्लोरिक अम्ल और सांद्र नाइट्रिक अम्ल का ताज़ा मिश्रण होता है। 'एक्वा रेजिया' लैटिन भाषा का शब्द है। इसका शाब्दिक अर्थ होता है 'रॉयल जल'। एक्वा रेजिया सोने को गला सकता है। सांद्र हाइड्रोक्लोरिक अम्ल और सांद्र नाइट्रिक अम्ल दोनों में से किसी अम्ल में अकेले सोने को गलाने की क्षमता नहीं होती। एक्वा रेजिया भभगता द्रव होने के साथ प्रबल संक्षारक भी है। यह उन अभिकर्मकों में से एक है, जो सोने और प्लेटिनम को गलाने का सामर्थ्य रखते हैं।

It is a fresh mixture of concentrated hydrochloric acid and concentrated nitric acid in the ratio of 3:1. 'Aqua Regia' is a Latin word. It literally means 'Royal Water'. Aqua regia can corrode gold. Concentrated hydrochloric acid and concentrated nitric acid, neither acid alone has the ability to dissolve gold. Aqua regia is a sterility liquid and is also highly corrosive. It is one of the reagents that has the ability to smelt gold and platinum.

रसायन विज्ञान के इन 👇 प्रकरणों को भी पढ़ें। (Also read these 👇 episodes of Chemistry.)
धातुओं और अधातुओं से संबंधित तथ्य | Facts About Metals And Non-Metals

धातुओं की लवणों के विलयन के साथ रासायनिक अभिक्रियाएँ (Chemical Reactions of Metals with Solutions of Salts)

अभिक्रियाशील धातु अपने से कम अभिक्रियाशील धातु को उसके यौगिक के विलियन अथवा गलित अवस्था से विस्थापित कर देती है। सभी धातुओं की अभिक्रियाशीलता समान नहीं होती है। सभी धातुएँ ऑक्सीजन, जल और अम्ल के साथ रासायनिक अभिक्रिया नहीं करती हैं। इसलिए इस आधार पर सभी धातुओं के नमूने को अभिक्रियाशीलता को अवरोही क्रम में नहीं रखा जा सकता। विस्थापन अभिक्रियाएँ धातुओं की अभिक्रियाशीलता का उत्तम प्रमाण प्रस्तुत करती हैं। इन अभिक्रियाओं को बहुत सरलता से समझा जा सकता है। यदि धातु (A), धातु (B) को उसके विलयन से विस्थापित कर देती है, तो इससे स्पष्ट है कि धातु (A), धातु (B) की अपेक्षा अधिक अभिक्रियाशील है। इसे रासायनिक समीकरण के रूप में इस प्रकार समझा जा सकता है–
धातु (A) + (B) का लवण विलियन → (A) का लवण विलियन + धातु (B)

Reactive metal displaces a less reactive metal from the solution or molten state of its compound. Not all metals have the same reactivity. Not all metals react chemically with oxygen, water and acids. Therefore, on this basis samples of all metals cannot be arranged in descending order of reactivity. Displacement reactions provide good evidence of the reactivity of metals. These reactions can be understood very easily. If metal (A) displaces metal (B) from its solution, then it is clear that metal (A) is more reactive than metal (B). It can be understood in the form of chemical equation as–
Metal (A) + (B) salt solution → (A) salt solution + metal (B)

रसायन विज्ञान के इन 👇 प्रकरणों को भी पढ़ें। (Also read these 👇 episodes of Chemistry.)
धातुएँ– भौतिक गुणधर्म | Metals– Physical Properties

आशा है, उपरोक्त जानकारी आपके लिए उपयोगी होगी।
धन्यवाद।
R F Temre
rfcompetition.com



I hope the above information will be useful and important.
(आशा है, उपरोक्त जानकारी उपयोगी एवं महत्वपूर्ण होगी।)
Thank you.
R F Temre
rfcompetiton.com

Comments

POST YOUR COMMENT

Categories

Subcribe